AWR Design Environment by National Instruments is one of the most powerful and practical software for designing and simulating high frequency RF circuits such as amplifiers, mixers, oscillators and…. is. This software is one of the specialized software of the telecommunication group and is suitable for telecommunication and electronics engineers and students and all people who work in the field of RF and Microwave circuit design. This program consists of three different tools. These powerful tools are fully integrated into this suite, eliminating the need to leave the main application environment to use them while working. VSS enables you to design, analyze, and analyze end-to-end communication systems. Analyze. You can design systems consisting of modulated signals in this section.
Different parts of AWR Design Environment software:
Visual System Simulator (VSS)
This section allows you to design and analyze telecommunication systems, channel blocks, coded schemes and their simulation by VSS receivers and transmitters. You can choose to display the BER, Constellation and power spectra and براساس curves based on the analysis you need. VSS has a timer to adjust the layout and see the effect of the changes immediately.
This section consists of two subsets: Microwave Office MWO and Microwave Office AO, and enables circuits that combine schematic and magnetic structure to be designed by AWR simulation engines, including linear simulators, advanced harmonic and nonlinear simulators, and electromagnetic simulators. Gives you. This tool provides you with the results of the analysis graphically and allows you to reflect the plan according to the existing reports, optimize and change the changes directly on the plan.
3D Planar Electromagnetic (EM) Analysis
This tool allows users to quickly, easily analyze, optimize and describe passive components in various areas such as RF PCBs, Modules, LTCCs, MMICs, RFICs, Antennas. Using this section takes less time to design.
3D FEM Electromagnetic (EM) Analysis
Using this tool, users can view the drawings drawn by other tools in three dimensions and, if necessary, optimize and change the drawn circuits and the output data.
Features of AWR Design Environment:
– Design of low noise amplifiers (low noise amplifier),
– No need to leave the main program environment
– Design of telecommunication power amplifiers (rf power amplifier)
– Design, analysis of end-to-end communication systems
– Design of oscillators
– Design and simulation of RF and high frequency circuits
In the Readme file in the Crack folder.
NI AWR Design Environment 13.01
Microwave Office + Analyst-MP + Vendor Local 13