Zemax is optical design software used to design and analyze optical and lighting systems. It was written by Mr. Ken Moore and was the first optical design program for the Windows operating system. The first version of the program was released in 1990 under the name Max, which was later changed to its current name, Zimax. This program is used to design and analyze photography systems such as camera lenses as well as lighting systems. The basis of this program is based on tracking rays and optical beams and modeling rays through an optical system. You can model various optical elements such as plain lenses, aspheric lenses, mirrors and differential optical elements with the help of this program. It is also possible to produce standard analytical graphs such as point and fractional X-ray graphs. Zemax is also able to model the effect of light coatings on the surface of components.
A library of commercial lenses is provided for this purpose. This program can perform continuous sequential numerical tracking among optical elements or non-consecutive optical tracking for light analysis and emission of physical prototypes. Zimax is able to take into account tolerances and design errors that occur due to physical limitations or human errors. Simex optimization tool can improve the design of lenses by taking automatic parameters and reduce the amount of distortion to a minimum. Zemax has a complete library of commercial lenses, optical materials that can be used for optical analysis. This program can be used due to physical optics features for devices whose diffraction is very important, such as laser beams and light coupling in optical fibers.
First, run and install the RZPrerequisites.exe file while Windows has Internet access. Then run the Zemax_2014-08-20_x64.exe file and install the software. Finally, copy and replace the file in the Crack folder in the program installation location.
The software must first copy the required files to the Windows Document.
! If a copy of the software is already installed, the Zemax folder in C: \ ProgramData and Document must be removed.