Download Schlumberger OLGA 2022.1 x64

Description

Schlumberger OLGA software has been developed for modeling and simulating multiphase flow, which is a dynamic process. This program was first officially offered by Statoil, which was then acquired by SPT Group, and after the purchase of this group by Schlumberger, its development was entrusted to Schlumberger. In Olga software, all types of pipeline networks, which include various process equipment such as compressors, valves, heat exchangers, pumps, etc., can be dynamically modeled and simulated.

Features and features of Schlumberger OLGA software :

– Accurate and advanced simulation and modeling of the flow inside the pipes

– The ability to simulate the dynamics of oil and gas pipes in different conditions

– The possibility of calculating and entering various components such as heat transfer between the pipeline wall and the environment, branching of pipes, corrosion of pipes, etc.

– Carrying out calculations and analysis in steady state (Steady-State) to investigate flow problems and challenges

– Time-Dependent or Transient Flow simulation to maximize production potential

– The possibility of environmental impact assessment

– The ability to accurately simulate and predict the main and key operation conditions such as startup, shutdown, pigging operations, etc.

And…

The

required system

Windows 7 / 8.1 / 10 x64

Pictures

Installation guide

It is given in the Readme file in the Crack folder.

2016.2.1 version has been installed and successfully activated on Windows 10 64-bit on 13 August 96.

Version 7:

Start installing the license management tool by running the Setup_DownLoadLy.iR.exe file and select Use a demo- or nodelocked license during installation. After displaying the SPT License Handler window, click on Configure and enter the OLGA_DownLoadLy.iR.lic file from the Crack folder. Click on Close to start installing the software; After the installation is complete, copy and paste the contents of the SPT Group folder located in the Crack folder to the program installation location. Finally, copy the OLGA_DownLoadLy.iR.lic file to the root of the C drive and run the software. If necessary, create a folder called FlexLM in the C drive and copy the OLGA_DownLoadLy.iR.lic file into it and change its name to license.dat.