Description
CAN & LIN communication protocols and AUTOSAR course.
- An overview of CAN and LIN protocols: an introduction to CAN and LIN protocols, an overview of the reasons for the development of CAN and LIN, a comparison of CAN with other serial communication protocols , CAN automotive network architecture, CAN protocol features, CAN frame formats
- Data frame, remote frame, error frame and CAN overload frame
- Arbitration process in Controller Area Network (CAN) communication protocol to resolve BUS conflict
- NRZ format Controller Area Network (CAN) protocol.
- Bit padding to avoid problems due to NRZ format
- Error management and error detection
- Different types of errors such as bit error, CRC error, ACK error, fixed form error.
- The concept of differential voltage in the controller area network (CAN).
- Control Area Network (CAN) node interface levels.
- Controller network (CAN) receivers.
- Control Area Network (CAN) physical layer: CAN nodes, CAN bus voltage levels and node interface techniques, CAN bit timing and baud rate settings
- Control Area Network (CAN) Data Link Layer: CAN Bus Arbitration, CAN Bus Fault Confinement
- Comparison between Controller Area Network (CAN) and LIN
- Limitation of Controller Area Network (CAN)
- LIN frame formats
- In-car network, LIN protocol features
- LIN physical layer: LIN nodes, LIN bus voltage levels and node interface techniques
- PID calculation (soon to be added)
- Checksum calculation (soon to be added)
- Error detection and handling not covered (will be added soon)
- Comparing CAN with Flexray
- Flexari protocol overview
- Features of the Flexray communication protocol
What you will learn in the CAN & LIN communication protocols and AUTOSAR course
-
CAN, LIN and Flexray vehicle communication protocols
-
CAN protocol in depth
-
Features of LIN protocol and frame formats
-
CAPL programming using BUSMASTER programming, CAPL
-
Training to build a CAN network using ARM cortex M3
-
Teaching how to build a CAN network with Arduino using model-based design (simulink)
-
AUTOSAR basics with real-time examples
-
A very short overview of flexray
This course is suitable for people who
- Automotive engineers
- Software developers
- Professional software testing in the car
- Automotive engineers
- Automotive industry engineers
- Hardware and software developers, electronics engineers, engineering students, faculty members, technicians, and anyone with a modicum of CAN and LIN networking.
- Embedded systems specialists
CAN & LIN communication protocols and AUTOSAR course specifications
- Publisher: Udemy
- teacher: Reshma Mane
- Training level: beginner to advanced
- Training duration: 8 hours and 1 minute
- Number of courses: 76
CAN & LIN communication protocols and AUTOSAR course topics
CAN & LIN communication protocols and AUTOSAR course prerequisites
- Basics of automotive and electronics
Course images
Sample video of the course
Installation guide
After Extract, view with your favorite Player.
Subtitle: None
Quality: 1080p
download link
File(s) password: www.downloadly.ir
Size
2.8 GB
Be the first to comment