Download Keysight PathWave Advanced Design System (ADS) 2024 Win/Linux

Description

EDA stands for Electronic Design Automation and means electronic design automation, it is a set of software tools for designing all kinds of electronic systems. Advanced Design System software, or ADS for short, is the company’s advanced and professional program Keysight Formerly known as Agilent. It is for EDA, which provides specialized facilities for the fields of design and analysis of various types of radio frequency devices or RF, microwave, digital signal processing or DSP, etc. This software has provided professional and complete tools for all stages of schematic design, simulation and analysis processes and is almost unmatched in this field.

Features and features of the software Advanced Design System :

– Complete schematic design and circuit layout

– The leader with the latest technologies in the electrical, electronic and telecommunication industries

– Has a complete library of all types of required parts such as transistors, sources, diodes, transmission lines, etc.

– The possibility of designing all kinds of analog and digital filters

– The capability of linear simulation and analysis of S parameters as well as X-Parameter

– It has a Radio Frequency (RF) system simulator

– Analysis of alternating current AC and direct DC

– Ability to optimize circuit performance with 13 optimization tools

Analysis of power amplifiers

– Calculating and simulating the operating point of transistors

– Graphical and numerical display of the output information of various parameters with the possibility of comparison

Ability to work with Smith chart

– Using the Harmonic Balance analysis method

– Investigating and calculating the dispersion parameters of MOSFET or Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET)

– Transient Analysis capability

– Calculation of momentum or the amount of movement (Momentum)

And…

The

The set of changes made in this version of Advanced Design System from Here Is visible.

The

Program tips Advanced Design System :

– This version with a valid license and full crack is tested and published for the first time by Donnelly.

– From this version, the program is offered only in 64-bit edition.

– Linux version was also added.

required system

This version is only installed in 64-bit versions and Enterprise or Ultimate editions of Windows 7 and newer, and it is not possible to install it in Windows Vista or XP. The complete list of supported platforms in different versions Here look.

Processor: 1.66 GHz, 64-bit, x86 quad-core processors or higher

RAM: 4 GB RAM or higher

Hard Disk Space: 10 GB free disk space or greater

Screen resolution: 1024 x 768

: Model Development dependency for model development or 64-bit Verilog A Simulations

Visual Studio 2012 Update 1 Professional version or higher

About editing Linux too Here see.

:Operating System

(Red Hat RHEL5 (64-bit

(Red Hat RHEL6 (64-bit

Novell SUSE SLES11 (64-bit

Pictures

Installation guide

The 2021 version was installed and successfully activated on April 29, 1400.

Version 2023 has been installed and successfully activated on 31 May 1402 in Windows 10 64-bit edition.

Version 2024 has been installed and successfully activated on Windows 10 64-bit edition on March 24, 1402.

2020 and 2021 version:

Install the program, at the end of the installation, a window titled License Setup Wizard will open, close it. Inside the crack folder, replace the EEsof_License_Tools folder with the original folder in the software installation location (by default, in the C:Program FilesKeysightEEsof_License_Tools path, copy the folder to the folder where EEsof_License_Tools is located and hit Overwrite). Then go into the copied folder, the bin folder and then win32_64 and run the server_install.bat file in Run as Administrator mode, you should receive the message of successful installation and successful execution of the service (if there is an error message in the service execution not started successfully), open the Task Manager window, go to the Services tab, click on Open Services at the bottom of the window, look for EESoft Flexnet License Server in the opened list. Then right click on it, click Properties, go to Log On tab and click on Local System Account and then click Ok. Right-click on EESoft Flexnet License Server again and click Start).

Then, run the Keysight_Licensing.reg file in the crack folder and click Yes. Then replace the ADS2020_update2 folder with the main folder in the software installation location (by default, in the C:Program FilesKeysightADS2020_update2 path, copy the folder in the folder where ADS2020_update2 is located and press Overwrite). Finally, restart your system. After running the program, a list of licenses installed on your computer will be displayed; Choose one of them. Now the program is ready to use.

2017 and 2016 version:

Install the software and close the license management tool window after completion. Open the License_DownLoadLy.iR.lic file in the EEsof_License_Tools folder in the crack folder with Notepad; Replace DOWNLOADLY.IR (for 2017 version) or myserver (for 2016 version) with your computer name. (The name of the computer is known in System Properties of Windows and the expression Computer name.) Then, instead of all the numbers 112233445566, enter your Host ID and save; To do this, use the Replace option in the Edit menu. (Host ID is of two types, which here means the MAC Address or Physical Address of the network card; to get it, double-click on the network card and then click on Details, in the displayed window, enter the phrase opposite Physical Address without – and in the form of 12 characters. It is also obtained through the CMD environment and entering the command getmac. Make sure that this value must be entered without a space in the license file) then copy and replace all the contents of the Crack folder in the following default path:

C:Program FilesKeysight

Now run the license management tool by entering ADS in the search section of the Start menu and clicking on ADS License Manager and clicking on Add or replace a license file. Enter the License_DownLoadLy.iR.lic file that you copied in the first step (from the software installation location) and click Next. After confirming the license, close the License Manager and run the program.

! After installing the software, the name or location of the license file should not be changed.