Download Proteus Professional 8.17 SP2 Build 37159

Description

Proteus Professional software is one of the best and most powerful programs for designing electrical circuits and simulating MicroProcessor or microprocessors and microcontrollers. Designing PCB (short for Printed Circuit Board) and schematic drawings are also among the capabilities of this Proteus. This program consists of several modules and components, the main ones of which include the ISIS Schematic Capture section; Schematic design and simulation of analog, logic and microcontroller circuits, PROSPICE Mixed mode SPICE simulation; Simulation based on Spice models, ARES PCB Layout section; The design of the printed circuit board is through or without schematic entry (from ISIS environment).

Features and features of the software :

– Easy to use and at the same time high strength and flexibility

– Design and simulation of AVR and all kinds of electrical circuits with high accuracy and reliability

– Possessing complete simulation design tools and all kinds of measuring elements

– Has ISIS library with a wide range of microcontrollers

– The possibility of programming in the software environment

– Quick design of PCB or printed circuit board without the need to change the designed circuit

– VSM capability (abbreviation of Virtual System Modeling)

– Taking advantage of advanced routing modes

– Accurate and complete troubleshooting of the program

– Graphical and three-dimensional representation of the design

And…

The

To learn more about different parts of Proteus, online videos Here see.

required system

The software and hardware requirements of this software have not been published by the manufacturer; But according to the investigation, it can be implemented and used with minimal facilities.

Pictures

Installation guide

Version 8.10 is cracked and with normal installation, the software is cracked automatically.

Version 8.9: install the software according to the Readme file in the directions given in the Readme file and copy the PP8.9.exe file in the installation location and run it once; Run the program and if you need a license, enter the Licence.lxk file and install it.

Version 8.8:

After installation using the license, copy and replace the files and folders in the modified Crack folder in the installation path of the program.

Version 8.7 SP3;

Start installing the software and select the Local License option, and in the next step, enter the license in the Crack folder and install it. Continue the installation process and select the Custom option; Change the second path, which corresponds to the ProgramData folder, to the first default path, Program Files (in other words, make both paths the same). After the installation is complete, copy and replace the two folders in the Crack folder in the same path as the program installation.

Version 8.9 on 10D98 on Windows 10 64-bit edition using the new license, installed and – as shown in the image – successfully activated; Versions 8.8 SP1 were tested on December 2, 1997 and 8.7 SP3 on November 6, 1997.

Also, cracked version 8.10 and 8.12 have been installed and successfully activated on Windows 10 64-bit edition on November 11, 1400.

Version 8.15 was installed and successfully activated on Windows 10 64-bit edition on November 27, 1401.