Description
AWR Design Environment, a product of National Instruments, is one of the most powerful and practical software for designing and simulating RF and high frequency circuits such as amplifiers, mixers, oscillators, etc. is. This software is one of the specialized software of the telecommunications group and is suitable for engineers and students of telecommunications and electronics and all people who work in the field of designing RF and microwave circuits. This program consists of three different tools. These powerful tools are fully integrated in this collection, which means that you don’t need to leave the main environment of the program to use them during work. The VSS program enables you to design and analyze End-to-End communication systems and analyze You can design systems consisting of modulated signals in this section.
Different parts of AWR Design Environment software:
Visual System Simulator (VSS)
This section allows you to design and analyze telecommunication systems, channel blocks, coded schemes and their simulation by VSS receivers and transmitters. You can choose to display BER curves, Constellation and power spectra, etc. based on the analysis you need. VSS has a time tuner to adjust the design and see the effect of changes immediately.
Microwave Office
This section consists of two sub-sets, Microwave Office MWO and Microwave Office AO, and allows you to design circuits that are a combination of schematics and magnetic structure by AWR simulation engines, which include linear simulators, advanced harmonic and non-linear simulators, and electromagnetic simulators. Gives. This tool provides you with the results of the analysis graphically and allows you to optimize the designs according to the existing reports and reflect the changes directly on the design.
3D Planar Electromagnetic (EM) Analysis
This tool allows users to quickly and easily analyze, optimize and describe passive components in different sectors such as RF PCBs, Modules, LTCCs, MMICs, RFICs, Antennas. By using this section, less time is spent on design.
3D FEM Electromagnetic (EM) Analysis
By using this tool, users can view the designs drawn by other tools in 3D and, if needed, optimize and change the drawn circuits and output data.
Features and features of AWR Design Environment:
– designing low noise amplifiers (low noise amplifier),
– No need to leave the main program environment
– Designing telecommunication power amplifiers (rf power amplifier)
– Design, analysis of End-to-End communication systems
– Design of oscillators
– Design and simulation of RF and high frequency circuits
required system
:Operating Systems
Windows XP Professional
Windows Vista
Windows 7
Windows 8 – 8.1
Recommended Hardware
Core 2 CPU
2GB of RAM
1GB available disk space
Pictures
Installation guide
It is given in the Readme file in the Crack folder.
Note: To run version 16.02R, the system date must be after September 6, 2023!
Version 16.02R was installed on Windows 10 64-bit edition on 18 September 1401 and activated according to the above description.
Version 22.1i(17.01R) has been successfully installed and activated on Windows 10 64-bit edition on March 4, 1401.
download link
Download NI AWR Design Environment 22.1 (17.03R Build 17559 Rev3) x64
Download NI AWR Design Environment 16.02R Build 12568 Rev4 x64
Download NI AWR Design Environment 15.04R Build 10117 Rev2 (127347) x64
Download NI AWR Design Environment 14.04r Build 9307 Rev2 (118446) x64
Password file(s): www.downloadly.ir
Size
719 MB
Be the first to comment