AC Voltmeters

AC Voltmeters

The instrument, which is used to measure the AC voltage across any two points of electric circuit is called AC voltmeter. If the AC voltmeter consists of rectifier, then it is said to be rectifier based AC voltmeter.

The DC voltmeter measures only DC voltages. If we want to use it for measuring AC voltages, then we have to follow these two steps.

  • Step1 − Convert the AC voltage signal into a DC voltage signal by using a rectifier.
  • Step2 − Measure the DC or average value of the rectifier’s output signal.

We get Rectifier based AC voltmeter, just by including the rectifier circuit to the basic DC voltmeter. This chapter deals about rectifier based AC voltmeters.

Types of Rectifier based AC Voltmeters

Following are the two types of rectifier based AC voltmeters.

  • AC voltmeter using Half Wave Rectifier
  • AC voltmeter using Full Wave Rectifier

Now, let us discuss about these two AC voltmeters one by one.

AC Voltmeter using Half Wave Rectifier

If a Half wave rectifier is connected ahead of DC voltmeter, then that entire combination together is called AC voltmeter using Half wave rectifier. The block diagram of AC voltmeter using Half wave rectifier is shown in below figure.

AC Voltmeter Using Half Wave Rectifier

The above block diagram consists of two blocks: half wave rectifier and DC voltmeter. We will get the corresponding circuit diagram, just by replacing each block with the respective component(s) in above block diagram. So, the circuit diagram of AC voltmeter using Half wave rectifier will look like as shown in below figure.

PMMC Galvanometer

The rms value of sinusoidal (AC) input voltage signal is

Vrms=Vm2–√Vrms=Vm2
Vm=2–√Vrms⇒Vm=2Vrms
Vm=1.414Vrms⇒Vm=1.414Vrms

Where,

VmVm is the maximum value of sinusoidal (AC) input voltage signal.

The DC or average value of the Half wave rectifier’s output signal is

Vdc=VmπVdc=Vmπ

Substitute, the value of VmVm in above equation.

Vdc=1.414VrmsπVdc=1.414Vrmsπ
Vdc=0.45VrmsVdc=0.45Vrms

Therefore, the AC voltmeter produces an output voltage, which is equal to 0.45 times the rms value of the sinusoidal (AC) input voltage signal

AC Voltmeter using Full Wave Rectifier

If a Full wave rectifier is connected ahead of DC voltmeter, then that entire combination together is called AC voltmeter using Full wave rectifier. The block diagram of AC voltmeter using Full wave rectifier is shown in below figure

AC Voltmeter using Full Wave Rectifier

The above block diagram consists of two blocks: full wave rectifier and DC voltmeter. We will get the corresponding circuit diagram just by replacing each block with the respective component(s) in above block diagram.

So, the circuit diagram of AC voltmeter using Full wave rectifier will look like as shown in below figure.

Circuit Diagram of Ac Voltmeter

The rms value of sinusoidal (AC) input voltage signal is

Vrms=Vm2–√Vrms=Vm2
Vm=2–√Vrms⇒Vm=2Vrms
Vm=1.414Vrms⇒Vm=1.414Vrms

Where,

VmVm is the maximum value of sinusoidal (AC) input voltage signal.

The DC or average value of the Full wave rectifier’s output signal is

Vdc=2VmπVdc=2Vmπ

Substitute, the value of VmVm in above equation

Vdc=2×1.414VrmsπVdc=2×1.414Vrmsπ
Vdc=0.9VrmsVdc=0.9Vrms

Therefore, the AC voltmeter produces an output voltage, which is equal to 0.9 times the rms value of the sinusoidal (AC) input voltage signal.