Antenna Theory - Horn

# Antenna Theory – Horn

To improve the radiation efficiency and directivity of the beam, the wave guide should be provided with an extended aperture to make the abrupt discontinuity of the wave into a gradual transformation. So that all the energy in the forward direction gets radiated. This can be termed asÂ Flaring. Now, this can be done using a horn antenna.

### Frequency Range

The operational frequency range of a horn antenna is aroundÂ 300MHz to 30GHz. This antenna works inÂ UHFÂ andÂ SHFÂ frequency ranges.

## Construction & Working of Horn Antenna

The energy of the beam when slowly transform into radiation, the losses are reduced and the focussing of the beam improves. AÂ Horn antennaÂ may be considered as aÂ flared out wave guide, by which the directivity is improved and the diffraction is reduced.

The above image shows the model of a horn antenna. The flaring of the horn is clearly shown. There are several horn configurations out of which, three configurations are most commonly used.

### Sectoral horn

This type of horn antenna, flares out in only one direction. Flaring in the direction of Electric vector produces theÂ sectorial E-plane horn. Similarly, flaring in the direction of Magnetic vector, produces theÂ sectorial H-plane horn.

### Pyramidal horn

This type of horn antenna has flaring on both sides. If flaring is done on both the E & H walls of a rectangular waveguide, thenÂ pyramidal horn antennaÂ is produced. This antenna has the shape of a truncated pyramid.

### Conical horn

When the walls of a circular wave guide are flared, it is known as aÂ conical horn. This is a logical termination of a circular wave guide.

The above figures show the types of horn configurations, which were discussed earlier.

Flaring helps to match the antenna impedance with the free space impedance for better radiation. It avoids standing wave ratio and provides greater directivity and narrower beam width. The flared wave guide can be technically termed asÂ Electromagnetic Horn Radiator.

Flare angle,Â Î¦Â of the horn antenna is an important factor to be considered. If this is too small, then the resulting wave will be spherical instead of plane and the radiated beam will not be directive. Hence, the flare angle should have an optimum value and is closely related to its length.

### Combinations

Horn antennas, may also be combined with parabolic reflector antennas to form special type of horn antennas. These are âˆ’

• Cass-horn antenna
• Hog-horn or triply folded horn reflector

InÂ Cass-horn antenna, radio waves are collected by the large bottom surface, which is parabolically curved and reflected upward at 45Â° angle. After hitting top surface, they are reflected to the focal point. The gain and beam width of these are just like parabolic reflectors.

InÂ hog-hornÂ antenna, a parabolic cylinder is joined to pyramidal horn, where the beam reaches apex of the horn. It forms a low-noise microwave antenna. The main advantage of hog-horn antenna is that its receiving point does not move, though the antenna is rotated about its axis.

The radiation pattern of a horn antenna is a Spherical Wave front. The following figure shows theÂ radiation patternÂ of horn antenna. The wave radiates from the aperture, minimizing the diffraction of waves. The flaring keeps the beam focussed. The radiated beam has high directivity.

The following are the advantages of Horn antenna âˆ’

• Small minor lobes are formed
• Impedance matching is good
• Greater directivity
• Narrower beam width
• Standing waves are avoided