Invensys is a multinational company that manufactures a variety of engineering products under the titles Avantis, Wonderware and SimSci. Invensys SimSci-Esscor brand with the new name Schneider Electric SimSci, which is produced in collaboration with Schneider Electric, is a collection of software for designing and simulating fluid flow, performing calculations, analysis, optimization and production planning in chemical units. This collection consists of three parts: SimSci Design; Includes design and simulation programs, SimSci Operate section; Has simulation tools for better training and understanding, SimSci Optimize section; Includes process optimization programs and the SimSci Spiral section, including project management software and production cost estimation. One of the most important software in this series is SimSci PRO / II.
For the design and simulation section, several different software are presented, which we introduce and present its five main and most widely used programs;
.Update: Invensys has been known as Schneider Electric since early 2015, and the software suite in this division is known as Schneider Electric SimSci.
Update 2: In March 2018, the AVEVA Group announced its merger with the Schneider Electric Industries, and the company’s software products will be developed under the AVEVA software suite.
The main software of the Schneider Electric SimSci collection:
Invensys SimSci-Esscor PRO / II or Schneider Electric SimSci PRO / II: Powerful software for designing and simulating chemical processes and performing advanced process analysis in oil, gas and chemicals
Invensys SimSci-Esscor INPLANT: Fluid flow simulator program with the ability to design, rank and analyze piping systems
Invensys SimSci-Esscor HEXTRAN: Advanced Heat Transfer Simulation Software; Suitable for designing all types of single and network heat exchangers and analyzing their performance
Invensys SimSci-Esscor PIPEPHASE: Powerful program for accurate simulation and modeling of pipeline systems as well as analysis and calculation of flows and parameters related to pipelines
Invensys SimSci-Esscor DYNSIM or Schneider Electric SimSci DYNSIM: A comprehensive OTC (Operator Training Simulator) software for dynamic simulation of processes with analysis and control to improve efficiency and productivity
The installation methods of PRO / II 10, 10.2 and DYNSIM 5.3.2 are given in the Readme file, which is completely the same as the previous versions.
SimSci PRO / II software:
Start installing the software and while installing, select the FlexNet 11.8 option and continue and complete the installation. Copy and replace the FlxNet11.dll file in the default paths:
C: \ Program Files \ Common Files \ SIMSCISI \ MSCICFI50 \ VC090x32 \ bin
C: \ Program Files (x86) \ Common Files \ SIMSCI \ SIMSCICFI50 \ VC090x32 \ bin
Copy and replace the License.dat file in the default paths below:
C: \ Program Files \ SIMSCI \ PROII94 \ Bin
C: \ Program Files (x86) \ SIMSCI \ PROII94 \ Bin
Run the Edit the system environment variables file and click on Environment Variables. In the System variable section, click New and enter and save the following values:
Variable name: IPASSI_LICENSE_FILE
Variable value: C: \ Program Files \ SIMSCI \ PROII94 \ Bin \ license.dat
And for 64-bit Windows:
Variable value: C: \ Program Files (x86) \ SIMSCIP \ ROII94 \ Bin \ license.dat
Run the Setup_downloadly.exe file to start installing the software and during the installation, select the default FELEXlm 9.5 option and enter the following phrase in the License Server section; Enter your computer name instead of DOWNLOADLY-IR.
2715 @ DOWNLOADLY-IR
Complete the installation and then copy the contents of the Crack folder to the root of the installation location by default C: SIMSCI ;
Run the lmtools.exe file and go to the Config Services tab and enter the addresses of the three required files as follows:
Service Name = SimSci_downloadly
Path to the lmgrd = C: \ SIMSCI \ lmgrd.exe
Path to the license = C: \ SIMSCI \ License_downloadly.dat
Path to the log = C: \ SIMSCI \ Log_downloadly.log
Activate the Use Services option and then Start Server at Power Up and click Save Service. Finally, go to the Start / Stop / Reread tab and click on Start Server; Alternatively, you can run the Start_downloadly.cmd file before each run of the software, and then run the software.
Username and Password To run DYNSIM software, the phrase is simsci .