CADPower , is one of the software of DesignSense company (formerly developed by Four Dimension Technologies). The software in front of you is an add-on for AutoCAD and BricsCAD software. This software helps you to use CAD software more easily. CADPower is one of the most comprehensive tools for CAD software, which is also very popular.
With the toolset in CADPower, you can add more power to CAD software. This will make your operations more efficient and faster. On the other hand, the tools in this collection will significantly increase the speed of your operation and you will be able to carry out your work in the shortest possible time.
By installing this software, an option called CAD Power is added on the task bar of CAD software. With this option, you will be able to access various Draw, Attributes, Blocks, etc. tools. In this way, you will be able to use the tools in this collection.
Features and features of CAD Power plugin:
- Easy and convenient software installation
- Add CA DPower option to your CAD software automatically
- Increase speed and productivity in doing your work
- Significantly reduce your errors
- Benefit from advanced tools Polyline Tools
- Benefit from tools Conversion Tools
- Benefit from tools Export Tools
- Benefit from tools Draw Tools
- Benefit from tools Build Tools
- Benefit from tools Annotation Tools
- Benefit from tools Block Tools
- Benefit from tools Text Tools
- Benefit from tools Extended Entity Data Tools
Windows 7 – SP1 or later
Read the Readme.txt file in the Crack folder.
Installation guide in BricsCAD:
Version 22.23 is incompatible with BricsCAD version 22 and additional steps are needed to activate the program menus and crack it. In the following guide, the steps marked with * are only for BricsCAD V22:
- Install the software. If using BricsCAD version 21 and below, the CAD Power menu will be activated automatically in the program. If you are using BricsCAD V22, use the instructions displayed at the end of the CADPower installation to activate the CAD Power menu in BricsCAD.
- Run BricsCAD, get the Application Key code from the CAD Power -> Display Application Key menu and save it somewhere. Close the software.
- Run the keygen_cad power_22_nkAlex_en.lsp file with Notepad, replace the software installation path (default: C:\Program Files\Designsense\CADPower22_BricsCAD_EN) for the value setq CADPowerPath (line 33) (be sure to use \) . For the setq OperatingPlatform value (line 60), replace “BricsCAD” with “AutoCAD”. For setq ApplicationKey (line 66), replace the received Application Key with “000-000-000-000-000-000-000-000” at the beginning and end and save the file.
- * In the CADPower installation path, delete the doslib21x64.brx file.
- * From GitHubDownload the doslibbrx.zip file, copy the DOSLib22x64.brx file in the CADPower installation path and rename it to DOSLib21x64.brx.
- Run BricsCAD in Run as administrator mode, enter the APPLOAD command and load the keygen_cadpower_22_nkAlex_en.lsp file. After receiving the Generated license message in the console, close the software.
- Run the software again. Running the software when CADPower is cracked is a bit long and you will be faced with warning messages about the license being invalid. Just wait for the software to run.
All features of CADPower 22.23 may not be available in BricsCAD V22!
Version 22.23 has been installed and successfully activated on BricsCAD V21 and V22 on Windows 10 64-bit
Last Updated on July 10, 2023 by admin