Description
PumpSim is an efficient software for modeling, design, optimization, etc simulation Liquid pumping network. This program is completely interactive and based on exactly the same 3D technologies as in Ventsim software used is built. This software provides the possibility of designing and simulating piping network and pumping systems accurately. Pumpsim can model the pressure of pipes and the pressure on pumping systems. It is also possible to model the volume and intensity of flow, opening and closing of pipes and channels, capacity of tankers and seals, density and viscosity of liquids, valves and spray nozzles, etc. This program is able to estimate the costs and effectiveness of your network and put these two indicators in a better state by providing suggestions.
PumpSim graphical environment is advanced, dynamic and fully interactive, and users feel comfortable working with it. The 3D engine used in this software is designed in a way that enables smooth rotation, zooming and moving of any part of the design. Also, by using real-time animations, the performance of the network can be well understood. Designing a pumping network is not just putting pipes together and connecting them to each other. This requires a little creativity. At the same time that you have to do the modeling work, you should also pay attention to its optimization and cost-effectiveness. One of the good features of Pumpsim is its special attention to optimal design. Wherever necessary, with warnings or suggestions, it will put you on the path to design the network with the maximum amount of optimization.
This program was previously provided by Chasm Consulting, which was acquired by Howden Group after its acquisition.
Features and features of Pumpsim software:
- Modeling of all liquid pumping network components (pipes, channels, pumps, tankers, manual and automatic valves, connectors, drains, etc.)
- Calculation of speed, pressure and other parameters
- Animated simulation of liquid movement inside pipes
- Calculation and estimation of the level of optimization and the amount of final costs
- Calculation of the pressure on the pump and pipes
- Analysis of tanker structure and their capacity
- Examining the frictional effects of the pipe wall
- And …
required system
Pumpsim™ operates under Direct3D, a Microsoft standard introduced over 15 years ago. It is designed to run on Windows XP, Vista and Windows 7/8/10. Recent computers are likely to have a suitable graphics solution, however older computers (4 years or older) will require a Direct3D compatible graphics card (likely from ATI or NVIDIA). Suitable graphics cards are available for as little as $50.
Pictures
Installation guide
It is given in the Readme file in the Crack folder.
Do not run the software after installation. Run the Notepad program in Run as admin mode, from the File -> open menu, go to C:WindowsSystem32driversetc and open the Hosts file (if you don’t see the file, from the lower right corner , change the Text Documents option to All Files) then two statements
127.0.0.1 ventsim.com
127.0.0.1 pumpsim.com
add to the end of it. Instead, you can block the software completely in the firewall. Then run the LicGen file from the crack folder and click on the PumpSim icon (right side) to receive a success message. The software is now ready to use.
Version 3.1.2.6 was installed on Windows 10 64-bit edition on May 25, 1400 and – as seen in the picture – was successfully activated.
Note: The crack of this program does not work in newer versions of Windows 10 (probably 21H1 and later) and Windows 11!
download link
Download Howden PumpSim Premium 3.1.2.6
Password file(s): www.downloadly.ir
Size
67 MB
Be the first to comment