Description
LinSig is a specialized software from JCT Consultancy that allows traffic engineers to model traffic signals and their impact on traffic capacities and vehicle queues. Modeling the effects of traffic signals will optimize the timing of signals in order to reduce delay or increase the capacity of intersections and optimal connections. The program was developed by Brian Simonitt in the 1980s and has been updated several times by the manufacturer. This program does this by using demonstration traffic and optimizes the signal timing of intersections to its maximum capacity.
Features and features of LinSig:
- It has a controller model
- Accurate traffic modeling
- Traffic network capacity modeling
- Graphical traffic management
- Bus modeling
- Pavement modeling
- Signal optimization tool
- Traffic volume estimation
- Ability to create animation
- Export to CAD file
- Management of views
- And …
required system
Hardware requirements
The absolute minimum hardware standard is:
PC with at least a 2Ghz processor or equivalent.
1Gb RAM.
25Mb of free hard disk space.
Minimum Graphics resolution of 1280×1024 with Full (32 bit) color.
19” monitor.
CD Drive (required for installation only).
A two-button mouse.
The suggested hardware standard is:
PC with a 3.0 GHz processor. Optimization of larger networks benefits from a faster processor
2Gb RAM. Optimization of larger networks will benefit from 3-4Gb of RAM
25Mb of free hard disk space.
Graphics resolution of 1920×1200 with full (32 bit) color.
24″ 1920×1200 resolution monitor.
An additional monitor (with compatible graphics card(s)) is very useful but not essential. For larger networks, a second monitor becomes essential for maximum productivity. In our experience, a second monitor (cost ~£180) is one of the most cost effective ways of improving LinSig productivity. (And many other applications as well!!)
CD Drive (required for installation only).
A three-button wheel mouse. Not essential but extremely useful for zooming graphical views.
Please note that depending on the version of Windows you are using, the hardware requirements for Windows may exceed the above.
Software requirements
LinSig 3 can be used on any of the following platforms:
Microsoft Windows 10
Microsoft Windows 8
Microsoft Windows 7 (32-bit and 64-bit)
Microsoft Windows Vista
Microsoft Windows XP
Microsoft .Net Version 2.0 or 3.5 is also required to be present.
Although LinSig 3 is no longer formally supported on earlier versions of Windows, it is envisaged that LinSig should run successfully on:
Microsoft Windows 2000 with Internet Explorer Version 5.5 or above.
LinSig 3 will not run on Windows 98 or below.
Pictures
Installation guide
Read the Readme.txt file in the Crack folder.
download link
Download JCT_Consultancy_LinSig_v3.2.33.0
Password file(s): www.downloadly.ir
Size
58 MB
Be the first to comment