Description
FluidFlow is a software for designing, modeling and simulating water and sewage lines, which is marketed by Flite Software. This program showcases the art of the software industry in the field of simulating fluid piping systems. FluidFlow simply allows you to design a piping network and then determine its performance through simulation. You can use all kinds of linear equipment, pumps, coolers, compressors, safety valves, etc., and evaluate and observe their condition based on different parameters during simulation. Unlike spreadsheet-based plumbing calculation systems that are prone to high errors, this program provides us with the possibility of accurate modeling and simulation with the lowest amount of errors by using a complete database of plumbing equipment.
Using this software, you can calculate liquid pressure or thermal changes of any part of the piping network. The interesting feature of this program is the combination and injection of several different liquids from different points into the piping network, and the software automatically provides the user with the physical characteristics of the resulting mixture. This program provides engineers with many capabilities such as compressible and non-compressible flows, heat transfer, multi-fluid transfer or a combination of them through the piping system, as well as non-Newtonian flows and gas/liquid two-phase flows. If your field of work and engineering is related to gas areas, liquids or piping networks, FluidFlow is a simple yet advanced software and a full-fledged simulator of liquid flows that will cover all your needs.
required system
System Requirements 1024 MB RAM (2048 MB recommended).
All versions of Microsoft Windows & MS Windows Server since 2000.
180MB of free hard disk space.
SVGA or higher resolution monitor (XGA recommended).
Mouse or other pointing device.
The software will only run on a Mac if you have Windows installed.
Pictures
Installation guide
For version 3.51, after installation, copy the license file to the path given in the guide; Run the program and enter PSFF for the password.
Version 3.51 was installed on 16 Dec 1401 in Windows 10 64-bit edition and – as shown in the image – successfully activated.
download link
Download Piping Systems FluidFlow 3.52
Download Piping Systems FluidFlow 3.51
Download Piping Systems FluidFlow 3.50
Download FluidFlow 3 Documentation
Password file(s): www.downloadly.ir
Size
117 MB