Routing IPv4 and IPv6 course. Understanding how data moves across IPv4 and IPv6 networks is a cornerstone of CCNA studies. This course explains in detail how IPv4 and IPv6 routing works with extensive demonstrations to explain how routers move IP packets. The whole purpose of a router is to transfer packets from one interface to another. In this course, IPv4 and IPv6 Routing, you will explore in detail how IPv4 and IPv6 routing works. You’ll start by learning how ARP works, allowing IPv4 packets to be sent in an Ethernet frame. Next, you’ll explore how to get IP packets out of the network using the default gateway settings on a PC, and then take a look at what happens after the router receives the packet and uses a route to send the message. Finally, you will see how to specify and configure static routes for IPv4 and IPv6. By the end of this course, you will have a better understanding of troubleshooting tools, how to use them to effectively troubleshoot a network, and how to set up a redundant IPv4 network using static routes. About Modares: Ross has had a varied career. He holds a degree in structural engineering from the Milwaukee School of Engineering, but left the profession shortly after graduating from college. Beginning in 1997, Ross formally began working in IT, implementing and supporting a paperless work order system for a natural gas company in Illinois. Since then, Ross has spent many years teaching and managing data networks. Ross spent 7 years at the University of Wisconsin Hospitals and Clinics, supporting and managing large services.
Be the first to comment