How to boost WiFi signal on Android phone?

boost WiFi signal

boost WiFi signal

The problem of poor Wi-Fi signal on Android phones is a recurring problem that millions of people face throughout the day. Routers with low performance or poor WiFi antenna of the smartphone are common reasons that make you get a poor connection. So it is not surprising that thousands of articles on this subject and solutions to this problem have been published on the Internet.

If you feel that your Android phone’s battery is running low or you will never reach the maximum speed of your Wi-Fi network, it is possible that you are connecting to a weak Wi-Fi network. Apart from the weakness of some Wi-Fi networks, there are other reasons, including thick walls, long distances from the router, and gadgets that are unable to use the maximum bandwidth of a network. In this article, you will learn a few simple tricks that allow you to receive the WiFi signal more powerfully on Android phones.

Look for the best WiFi access point

The best solution for this is a Wi-Fi analyzer . Relying on three functionalities, this program allows you to choose the best communication channel for your Wi-Fi network. This program allows you to implement the network optimization process without getting involved in complicated issues and achieve the ideal conditions without having technical knowledge.

It also examines which networks around you provide a stable connection. Finally, easy access to network information such as IP address number, DNS and network gateway are some of the information that this program provides you. This information may not be useful for ordinary users, but it is useful for professional users.

Check the cover of your mobile phone to make sure it does not interfere with receiving the WiFi signal

Most of the bezels offered for mobile phones, especially those with metal covers, prevent Wi-Fi signals from being received properly through the phone’s antennas. So check if your phone case is not an obstacle in the way of receiving signals. To investigate this issue, we suggest you install the Speedtest by Ookla application on your mobile phone and check the download and upload speed factors once with a protective frame and once without a frame.

Put your router in the best place

Putting the router in the right place is still a problem for many users. Most users place the router next to an electrical outlet or cell phone without being sensitive to it. While these two places are not a good place to put a router. If you feel that the signal is not being received by the router or its location, it is best to use the Wi-Fi FDTD solver program to determine the best location for the router.

Switch the WiFi frequency to the 5 GHz band

Most Android devices today support 5 GHz in addition to the old 2.4 GHz frequency. The big advantage of the 5 GHz frequency is that more spectra are free. Simply put, you are dealing with more free channels and less interference. At 5 GHz you have access to 23 20 MHz channels, while at 2.4 GHz you have access to 14 channels. But do not forget that at 2.4 GHz only three channels do not overlap with each other, while at 5 GHz the distances are longer and as a result the channels do not overlap. This will allow you to receive better signals at 5 GHz.

Change settings on Marshmallow and older Android devices

If your router is operating at 5 GHz, switch your mobile phone to this frequency. To do this, go to Settings> Wi-Fi> Advanced> Wi-Fi frequency band and then select Auto. This allows your phone to receive 5 GHz signals.

Change WiFi settings on phones running Android 7 or higher

Newer versions of Android do not allow you to change advanced Wi-Fi settings, but if you still feel you need to access these settings, install WiFiAnalyzer on your phone.

Update your firmware or radio

If your Android phone is still supported by the manufacturer and you receive new updates, this trick will not work for you much. But if you use advanced frames, note that you have to manually update your Android phone’s radio. To check this, go to Settings> About> Software updates.

Do not allow your phone to connect to weak connections

In the Marshmallow Android settings menu, there was an option that prevented your mobile phone from connecting to a weak Wi-Fi connection. This feature significantly saves battery power. This setting is available if your phone uses Android 6 or lower. To do this, go to Settings -> WiFi and select the icon that is in the form of three dots, go to the Advanced section and enable the Avoid poor connections option to prevent your phone from connecting to a weak network.

See also  Which option should we choose to connect the Android device to PC?