EDA stands for Electronic Design Automation, which means a set of software tools for designing a variety of electronic systems. Advanced Design System software, or ADS for short, advanced, and professional Keysight software, formerly known as Agilent. EDA, provides specialized facilities for the design and analysis of a variety of radio or RF devices, microwaves, digital signal processing or DSP, and so on. This software provides professional and complete tools for all stages of schematic design, simulation, and analysis processes and is almost unique in this regard.
Features and characteristics of Advanced Design System software :
– Complete schematic design and layout of the circuit
– Leading with the latest technologies in the electricity, electronics, and telecommunications industries
– Has a complete library of required components such as transistors, sources, diodes, transmission lines, and…
– Ability to design a variety of analog and digital filters
Ability to linear simulation and analysis of S parameters as well as X-Parameter
– Has a Radio Frequency (RF) system simulator
– AC and DC direct current analysis
– Ability to optimize circuit performance with 13 optimization tools
– Analysis of power amplifiers
– Calculation and simulation of the working point of transistors
– Graphic and numerical display of output information of various parameters with the possibility of comparison
Ability to work with Smith charts
– Using the Harmonic Balance analysis method
– Investigation and calculation of scattering parameters of MOSFET or Metal – Oxide – Semiconductor Field-Effect Transistor (MOSFET)
– Transient Analysis capability
– Calculate momentum or momentum (Momentum)
A set of changes made in this version of the Advanced Design System can be viewed here.
Advanced Design System program tips :
– This version is fully valid and tested with a valid license and crack and is published for the first time by Danloli.
– From this version, the program is provided only in 64-bit editing.
– A Linux version has also been added.
This version is only installed on 64-bit versions and Enterprise or Ultimate editing versions of Windows 7 and later, and cannot be installed on Vista or XP Windows. See the full list of supported platforms in different versions here.
Processor: 1.66 GHz, 64-bit, x86 quad-core processors or higher
RAM: 4 GB RAM or higher
Hard Disk Space: 10 GB free disk space or greater
Screen Resolution: 1024 x 768
: Model Development dependency for model development or 64-bit Verilog A Simulations
Visual Studio 2012 Update 1 Professional version or higher
See also Linux editing here.
: Operating System
(Red Hat RHEL5 (64-bit
(Red Hat RHEL6 (64-bit
(Novell SUSE SLES11 (64-bit
Version 2021 was installed and successfully activated on April 29, 1400.
2020 and 2021 versions:
Install the program, at the end of the installation, a window called License Setup Wizard will open, and close it. Inside the crack folder, replace the EEsof_License_Tools folder with the original folder in the software installation location (by default, in C: \ Program Files \ Keysight \ EEsof_License_Tools, copy the folder to the folder where EEsof_License_Tools is located) and click Overwrite.
Then go to the copied folder, bin folder, and then win32_64 and run the server_install.bat file in Run as Administrator mode, you should get the message “Successful installation and successful execution of the service” not started successfully), open the Task Manager window, go to the Services tab, click Open Services at the bottom of the window, look for EESoft Flexnet License Server in the opened list. Then right-click on it, click Properties, go to the Log On tab and click on Local System Account, and then click Ok. Right-click the EESoft Flexnet License Server again and click Start).
Then, run the Keysight_Licensing.reg file in the crack folder and click Yes. Then replace the ADS2020_update2 folder with the original folder in the software installation location (by default in C: \ Program Files \ Keysight \ ADS2020_update2, copy the folder to the folder where ADS2020_update2 is located, and click Overwrite). Finally, restart your system. After running the program, a list of licenses installed on your computer is displayed; Choose one of them. The app is now ready to use.
2017 and 2016 versions:
Install the software and close the license management tool window when done. Open the License_DownLoadLy.lic file in the EEsof_License_Tools folder in the crack folder with Notepad; Replace DOWNLOADLY (for the 2017 version) or myserver (for the 2016 version). (The computer name is specified in the Windows System Properties and the phrase Computer name is used.) Then enter and save your Host ID instead of all the numbers 112233445566;
To do this, use the Replace feature in the Edit menu. The host ID is of two types, which here means the MAC Address or Physical Address of the network card; to obtain it, double-click on the network card and then click on Details. This feature is also obtained through the CMD environment and entering the getmac command.
C: \ Program Files \ Keysight
Now run the license management tool by entering ADS in the search section of the Start menu and clicking on ADS <version> License Manager and clicking Add or replace a license file. Enter the License_DownLoadLy.lic file that you copied in the first step (from the software installation location), and click Next. After confirming the license, close the License Manager and run the program.
! After installing the software, the name or location of the license file should not change.
Keysight PathWave Advanced Design System (ADS) 2022 Update 1 x64
Keysight Advanced Design System (ADS) 2022 Update 0.1 x64
Keysight Advanced Design System (ADS) 2021.0 x64
Keysight Advanced Design System (ADS) 2020.2 x64
Keysight Advanced Design System (ADS) 2020 Update 1.1 Linux64
Keysight Advanced Design System (ADS) 2019 Update 1 Build Date 2019-03-26 x64
Fix bug that SIpro / PIpro could not run, and added RFpro emulation
ADS 2017 Update 1 x64
ADS 2016.01 x64
ADS 2015.01 x64
ADS 2015.01 Linux