KISSsoft is a specialized software for calibration, optimization and calculation and re-analysis of machine parts. Parts such as gears, shafts and bearings, screws, belts and moving cables, etc. This product also has the ability to integrate with popular CAD programs, and users can use its capabilities in air conditioning software. This program has a powerful analytical engine as well as a wide range of different parts and equipment to redesign and optimize mechanical and mechanical parts.
The calculation speed of this program is very desirable and can be used and exploited on systems with medium hardware. For example, one of the common tasks that can be done using this program is to check the connections of different parts of the body whether the loads are sufficiently tolerated or not. If there is a defect in these connections, with optimization and smart suggestions of this program, the problem can be solved and the strength and stability of the part can be increased.
Developed by KISSsoft AG, the team has been providing professional tools for engineers and designers in a wide range of engineering disciplines since its inception, including: Cable Systems, Gear Based Systems Movable equipment used in Formula 1 vehicles or even the delicate and sensitive gears of rovers and…. The company’s products are in line with international standards such as AGMA, IS, DIN, and the company’s tools are a standard solution for calibrating machines, reviewing various calculations, documenting safety issues and product life parameters.
Operating system: Windows VISTA, Windows 7, Windows 8, or Windows 10
Processor: at least compatible with SSE2
RAM: at least 4 GByte RAM
Screen resolution: at least 1280 x 960 pixels
Printer: Windows printer
Memory: hard disk approximately 800 – 3000 MB (depending on extent and requirements )
See Also Geomagic Sculpt 2021.0.56 x64
In the Readme file in the Crack folder.
KISSsoft 03-2018F SP6 Multilanguage x86
KISSsoft 03-2017F SP6 x86