RAID Data Recovery Guide and Tips

RAID Data Recovery Guide and Tips

If your RAID drive has failed, you would like to settle on an honest method to recover data from the drive. Typically RAID configurations are made during a thanks to maintain a balance between capacity and performance of the device. Therefore, the RAID drives require the additional disk to take care of the parity info. Given below are some tips which will assist you recover data from the drive and re-configure the RAID.

1. Analyze the Cituation

First of all, you would like to research things and examine the configurations of the RAID. during this process, confirm you are trying to seek out out which a part of your data is inaccessible. Check the RAID card also . Also, you’ll use Drive Monitor to see the problematic disks within the RAID.

2. undergo the Factory Manual

In order to recover data from a faulty RAID drive, confirm you read the factory manual also . this may assist you get a far better idea of the technical aspects of the cardboard and therefore the information you would like for the card-configuration.

3. Check the Backup

Find out if you’ll access the backup of the files you’ve got lost. If no backup is out there , you would possibly want to contact a RAID data recovery service. within the meantime, you do not want to write down more data on the drive.

4. Check the Raid Card and therefore the Motherboard

At times, the RAID drives are fine and therefore the problem is elsewhere . as an example , the matter could also be with the RAID card or the motherboard. For verification, you’ll send the devices to the manufacturers for replacement. On the opposite hand, if the RAID card can detect the drivers, likelihood is that that the RAID configuration is ok .

5. Don’t Try a Rebuilding Process

If the RAID won’t read the drivers, you’ll consider the rebuilding process. However, likelihood is that that the attempt won’t be fruitful. It’s better to avoid making any configuration attempt which will cause further damage. confirm you do not restore the backup on an equivalent disk.

6. Don’t Mess with the Raid Configuration

It’s not an honest idea to guess the RAID that involves the offset, stripe, parity or rotation configurations. If you ruin something, you’ll find it even harder to recover your data.

7. Contact an Expert

Although you’ll use an honest data recovery app to urge your data back, it isn’t recommended for variety of reasons. By contacting experts, you’ll rest assured that your data isn’t lost or overlooked .

If you’ve got RAID drivers, confirm you monitor the drives on a daily basis. With data maintenance, you’ll keep track of how each drive works and if anybody of them is faulty. Also, it is a must to make a backup of your files to get on the safe side.