Driver Reviver is a useful tool for updating and installing new system drivers. This program simply updates all your drivers in 4 steps. The first step is to scan the system, in this step, all the system hardware is identified, the current version of the drivers is determined and the newer version of these drivers are searched online in the program database. In the second step, the results of the tests are displayed, in this step, the complete information of the driver plus the life of the driver is displayed. For example, you may not have updated a driver for a long time. In this section, it is known as an old driver.
Select the drivers that you want to be updated in this step and in the third step, all the selected items will be downloaded. Finally, the last step is to install the downloaded drivers, which will be done automatically. Some drivers, such as sound cards or graphics cards, require a reboot after installation, which is best done if the program requests it, and do not delay. In this program, there is also the ability to back up drivers.
In this case, you can solve the problem by restoring this backup whenever the relevant files are deleted or the desired driver is justified by the problem. Automatic updating of drivers by this category of software will save a lot of time and in addition, will be more accurate than manual updating. One of the most common mistakes in installing drivers, especially for novice users, is downloading the wrong version of the driver. Improper installation of an improper driver usually causes many problems. To prevent these kinds of mistakes, using this software can be very helpful.
Driver Reviver SYSTEM REQUIREMENTS
300MHz or higher processor | 256 MB of RAM | 22 MB of hard disk space
Listed in the Readme.txt file.
Download ReviverSoft Driver Reviver 184.108.40.206 Multilingual
Download ReviverSoft Driver Reviver 220.127.116.11 Multilingual x64
file password link
Follow On Facebook
Follow On Linkedin
Follow On Reddit