Why does the laptop not boot?
There are several situations in which the laptop does not boot :
A) When the on / off button is turned on, your laptop flash turns on, but nothing is on your screen.
B) Your laptop displays an error message on a black or blue screen.
C) It does not show any reaction when pressing the on / off button.
In any of the above situations, consider if your laptop battery comes out or your battery is damaged and can not supply its battery to your computer, or if you press the on / off button But your laptop does not turn on, power and battery malfunctions, defects in hardware, software, etc. should be checked, troubleshooting a laptop that does not turn on or start up in turn can be much more difficult than the desktop Due to the inability to remove hardware. Below are the troubleshooting steps to help diagnose what might be turning on your laptop. We recommend that you use each of them to get the best results.
The solution to the problem of not booting the laptop
To solve the problem of not booting the laptop, check and try the following:
1. Check the power supply.
2. Disconnect external devices.
3. Hard reset laptop
4. Save disk
5. Safe Mode
The first solution
Check the battery condition.
As you know, if the power supply does not work properly, you can not turn on your laptop. So, first of all, you need to troubleshoot the battery and make sure it is working properly.
A) If the battery is the power supply and is damaged for any reason, you should replace it with a new battery and restart your laptop. Or remove the battery and plug in your laptop charger to fix the problem.
B) If you are using a power charger as a power supply for your laptop, check the charger port and power cord to make sure there is a problem. If the charging cable or AC adapter does not work properly, you can not turn on your laptop, so you should call the laptop support center and have it repaired or replaced.
If there is no problem with the battery status after troubleshooting, you can try another AC adapter to restart your laptop and see if it works. If your laptop is still not turned on, do not worry, we have other solutions to solve the problem of not booting the laptop .
The second solution
Disconnect external devices
Sometimes external devices connected to your laptop may not turn on your laptop, as some devices may cause hardware conflicts with your laptop. Do the following:
1. Make sure your laptop is off
2. Disconnect all external devices, including USB drives , docking stations, and printers.
3. Press the On / Off button to turn on your laptop.
If your laptop turns on normally, you need to find the cause of the problem. Then turn off your laptop, reconnect and re-test a hardware device each time. If you run into a problem again after connecting to a device, this device should be the reason your laptop did not boot and you should have its driver Update the device to fix the problem.
The third solution
Laptop hard reset
To do this, follow these steps:
1. Make sure your laptop is turned off.
2. Disconnect all external devices from the laptop.
3. Disconnect the power charger from the computer and remove the battery.
4. Press and hold the Power button for 30 seconds.
5. Connect the power supply (power adapter).
6. Press the on / off button to turn on your laptop.
7. Then close your battery and test again.
The fourth solution
This software, known as rescue disk, can detect and scan malware and then remove it. Download this program and put it on a flash memory or CD and connect it to the laptop to check if the laptop does not boot .
The fifth way
BIOS is one of the features of Windows that can be a salvation in case you do not have access to the system or there is a problem, use the BIOS settings, get Safemode mode and check the problem of not booting the laptop , If you have recently done a software or update, reset it.
Precautions to prevent the laptop from booting
Do the following to prevent Windows problems:
Make the necessary updates
To update your system, simply run Windows Update and update Windows. Windows 10 users, if they have any questions about this, can check out the Windows 10 Hiwatc update article .
As you know, a missing or old driver can cause the device to malfunction and cause problems such as the laptop not booting . Therefore, take updating and installing the latest version of drivers seriously.
There are two ways to update:
You can go to the device manufacturers website, find the latest driver for your device and install it on your laptop. Make sure you download the correct driver that is compatible with the operating system. This requires computer skills.
Another way to update drivers is to do it automatically or with the help of Driver Easy software .
Driver Easy automatically detects your system and finds the correct drivers for it. You do not need to know exactly what computer system is running and there is no need to worry about making mistakes during installation.
1. Download and install the Driver Easy program from the link provided.
2. Run the software and click the Scan now button. This will scan your entire computer and identify any drivers that have problems.
3. Click the Update button to automatically download the correct version of the driver and then install it. Of course, you can select Update all to automatically update all.
4. Restart the system to apply the changes.
See Also Windows 10 Customization Tutorial