build a stronger WiFi network with the second router
second router

build a stronger WiFi network with the second router

build a stronger WiFi with the second router

Wireless routers give you the ability to connect to the Internet via Wi-Fi without the need for wires. The rise of Wi-Fi technology in the 1990s coincided with the spread of personal laptops. Today, the expansion has reached the point where all members of a family, from children to adults, have their own laptops and mobile phones, and are connected to the Internet wirelessly everywhere.

Wireless routers do their job well as long as your home is not large, but if your home is large, the radius covered by the wireless waves of the routers can not reach the Internet to all parts of the house and people may They are connected to the network at a great distance from the router. Their connection must be constantly disconnected and reconnected. You can double the radius covered by your network by using a second router as a signal range amplifier.

The main steps of doing the job

First, connect the router you want to use as a signal booster to one of the router’s LAN ports with a Cat5 Ethernet cable, and the other end to the Ethernet port on the side of your laptop. Then insert a safety pin or paper clip into the hole of the router reset. The reset hole is usually located behind the router and next to the power adapter connection. Resetting the router will reset the settings to factory defaults, allowing you to easily access the router’s graphical interface and configure it from scratch.

To access the router’s graphical interface, enter the default IP address in your browser’s address bar. If you do not know the default IP address, visit for a list of common routers. For example, if you are using a D-Link router, enter IP in the address bar and then press Enter to enter your router settings page.

You must also enter the default login information to enter the router settings home screen. If you do not know the default login information for your router, go to Router and see common usernames and passwords.

After entering the router settings page, find the DHCP server option and disable it by selecting the Disabled option. DHCP server settings vary in different router models, but most popular manufacturers put these settings in the Basic Settings page. Find the SSID (router network name) option and rename it to your main network router. Because the SSID only affects computers that are connected to the network wirelessly, the SSID settings are usually located on the Wireless Setup screen of the user interface.

Find the password section of the router and change it to the password of your main router. Updating the SSID and password allows computers to connect to the extender from the main router without any problems. Finally, click Save Settings to update your router settings.

Now disconnect the Ethernet cable from the router and computer. Then connect one end of the Ethernet cable to the LAN port of the main router and the other end of the Ethernet cable to the WAN port of the signal amplifier router. Position the signal amplifier approximately 10 meters from the main router to ensure that network waves are transmitted to all parts of your home.

Things to keep in mind

 It is common for users to use the same router brand or even a similar model. Manufacturers such as Linuxis, Asus, and D-Link typically use the same IP address for all their routers. If you have set up your routers with the same IP, you must manually change the IP address of the router you are using as a signal extender. To do this, go to the graphical interface of the settings page and find the Local IP address option, then change its last number to another number. Keep in mind that you cannot use two identical IP addresses on the same network.

See Also A practical guide to managing wireless networks in Windows 10