The most common iPhone errors and their solutions

iPhone errors
Spread the love

Your iPad and iPhone may experience various errors during use. We now introduce the most common iPhone errors and their solutions.

If you are dealing with or repairing Apple iPhones and iPads, you will most likely encounter or will encounter errors that occur for a variety of reasons. If for any reason your iPhone or iPad has a problem, you can solve this problem by reading this article.

List of iPhone and iPad errors

IPhone and iPad errors are often indicated by numbers. The most common iPhone and iPad errors are as follows:

Error 1, Error 2, Error 3, Error 4, Error 13, Error 14, Error 21, Error 23, Error 29, Error 1011, Error 1012, Error 1600, Error 1601, Error 1602, Error 1603, Error 1604, Error 164, Error 163, Error 163, Error 163 Error 1645, Error 1646, Error 1647, Error 1648, Error 1650, Error 1669, Error 2001, Error 2009, Error 300, Error 3001, Error 3002, Error 3003, Error 3004, Error 3006, Error 3014, Error 3014, Error 3014 , Error 3295, Error 4005, Error 4013, Error 4014, Error 9006 and….

Error 0xE800000, Error 0xE800006b, Error 0xE800001, Error oxE8000065 and….

Error 1415, Error 1417, Error 1418, Error 1428, Error 1429, Error 1430 and….

The above errors are the most common iPhone and iPad errors that you may have encountered; But what are the solutions to these errors and why are they shown at all? In the following, we will talk about each of these errors and how to fix them.

1- iPhone errors related to hardware problems

Errors related to the iPhone hardware problem are as follows:

Error 1, Error 3, Error 10, Error 11, Error 12, Error 13, Error 14, Error 16, Error 20, Error 21, Error 23, Error 26, Error 27, Error 28, Error 29, Error 34, Error 35, Error 36, Error 37, Error 40 , Error 53, Error 56, Error 1002, Error 1004, Error 1011, Error 1012, Error 1014, Error 1667, Error 1669

Error 53 usually occurs due to a security breach and eventually results in the Touch ID being replaced or not working. Usually, in case of the above errors, the phone will remain in recovery mode and will not be able to boot. In the following, we will refer to the solutions that have the ability to fix these errors.

Be sure of the following

1- Make sure that the user of the computer you intend to use is selected as Administrator and is not a guest user (Guest).

2 – Make sure you are connected to the Internet and the speed is appropriate.

3- Set the date and time settings of your device correctly.

4- Make sure that the connected iTunes software installed on your computer is updated. To update the iTunes application, you must first run the iTunes application and click on the Help option (in the Windows version) or iTunes (in the Mac version) from the top menu. If a new update for iTunes is available, a warning message will be displayed with a Download option, install and run the new version after downloading.

5 – Make sure programs such as antivirus, firewall and غیر are disabled on your computer.

Fix iPhone hardware errors

To fix iPhone hardware errors, you need to do the following:

1. Restore your iPhone twice through the iTunes application. Restoring the iPhone will fix the above-mentioned errors and run the device without any problems, this will have an acceptable result if your iPhone operating system is at least iOS 9.3.2.

2- If the problem is not solved by performing a restore, it is better to connect to another Internet network and perform the restore operation again. It is possible that some system settings have prevented the iPhone from being properly restored, which will fix this problem.

3- Use DFU Mode. To use this mode, you must do the following:

Connect your iPhone, iPad or iPod to the computer with a suitable cable, first run the iTunes app and then press the iPhone’s power and home buttons at the same time and wait for the phone to restart. Hold down the Power and Home buttons for 5 seconds after the iPhone restarts. By doing this, your iPhone will be switched to DFU Mode and finally select the Restore option and issue a restore command and wait until Next steps to be done.

2- The most common iPhone errors related to connections and baseband

Another part of the iPhone is related to network connections and the phone’s baseband. Error 9, Error 4005, Error 4013 and Error 4014 are the main iPhone errors in this area, which we will introduce the solution to solve in the following.

Fixed errors related to connections, network and baseband

You need to use the following methods to fix errors related to connections, network and baseband.

1. Update the iTunes application: In the first step, update the iTunes application. To do this, first click on the Help option (Windows version) or the iTunes option (on the Mac version) from the top menu, and then select the Check for Updates option. . If a new update is provided for this program, the Download option will appear, which you need to select and install.

2. Restart your computer: In some cases, restarting the computer to which the iPhone or iPad is connected will fix the connection and baseband errors.

3- Update your computer operating system: Another way to fix errors is to update your computer operating system. The effectiveness of this strategy has not been fully confirmed; But in some cases, especially in Apple Macs, it fixes the problem and errors associated with the baseband.

4- Fully charge your iPhone battery: Not fully charging your iPhone battery can cause error 9, error 4005, error 4013 and error 4014, so it is necessary to fully charge your iPhone battery.

5 – Use another interface cable: To make sure the iPhone interface cable is safe, analyze its performance with another cable, maybe replacing the cable will solve the problem.

6- Use a different computer: Sometimes using a different computer will solve the problem and errors related to the baseband, so it is better to use this method as well.

6- Force restart your iPhone: Force restart of iPhone can lead to fixing errors 9, 4005, 4013 and 4014. To force restart the iPhone, you must first press and hold the Power and Home buttons at the same time until the Apple logo appears.

7- Use FDFU Mode: Entering DFU Mode and restoring through this mode can fix iPhone errors related to baseband and connections. To enter this mode, you need to connect your iPhone to the computer with the appropriate cable and run the iTunes application, then press and hold the iPhone’s power and home buttons at the same time until the phone restarts and the Apple logo appears. Also hold down the iPhone’s power and home buttons for five seconds to enter DFU Mode and finally select the restore option.

3- The most common iPhone errors related to security issues

In some cases, security issues can cause certain errors to appear on the iPhone. Errors 2, 4, 6, 1611 are examples of the most common iPhone security-related errors that usually occur when you try to restore your phone by connecting it to a computer and using iTunes software. There are special solutions to this problem and iPhone errors that we will mention in the following.

Fixed errors related to the security platform

The following methods can be used to fix iPhone errors related to the security platform:

1- Disable or remove antivirus and other security software: If security software such as firewall, antivirus and شده are installed on your device, you should disable it and delete it if necessary, and then perform the restore process again. Give. In many cases, installing these programs on the device will result in errors 2, 6 and 1611.

2- Replace the interface cable: Improper connection cable that connects the iPhone to the computer can cause security errors, so it is better to change this cable and then check the performance.

3. Restart your iPhone and PC: Restarting your iPhone and PC is another method that can fix security-related errors, so do it.

4- iPhone errors related to USB connection

Many iPhone errors are regular with a USB connection, some of the most common iPhone errors with a USB connection include errors 3, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643, 1650, 2000, 2001, 2002, 2005, 2006 and 2009. Problems with iPhone’s USB connection can occur with Invalid response error, we will introduce solutions to these problems and errors below.

Fix iPhone errors related to USB connection

You can use the following methods to fix related errors with USB.

1- Use a new USB cable and a new interface: One of the first reasons that cause errors related to the USB connection is the use of low-quality cables, so it is better to use the USB cable and the interface you use in the first step. Replace, doing this process will most likely solve your problem.

2- Change the connection port of your computer: Sometimes the connection port of the computer has a problem and is disconnected and disconnected, which disrupts the process of restoring the device through iTunes, so changing the connection port of the computer can cause Troubleshooting 3, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643, 1650, 2000, 2001, 2002, 2005, 2006 and 2009.

3- Use a different computer: Your computer settings may be optimized to prevent communication between the iPhone and the computer, so it is better to change your computer and perform the restore process on the new system.

5- The most common iPhone errors in the field of communication

Some iPhone errors during communication-related restoration or in the term Communication For examples of these errors, we can refer to errors 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194 and 3200. Errors that occur with the theme “There was a problem downloading the device is not eligible for the requested build” can also be related to this area and can be fixed by the following methods.

Fix iPhone errors in the field of communication

To fix iPhone and iPad errors in the field of communication, Apple has provided several different ways that you can use them to solve problems. The solutions are as follows:

1- Check the Internet connection: In many cases, an Internet disruption causes an error to appear. Connect to high speed internet and then repeat the restore process.

2. Check Apple servers: Sometimes Apple servers may be unavailable for a period of time for repairs and upgrades, during which time you may not be able to use Apple servers to exchange information, and You may encounter errors such as There was Problem downloading the software or errors 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194 and 3200 during the restore. To check Apple servers, you should visit the company’s website, if its servers are being repaired, try to restore your iPhone or iPad in a few hours.

3. Check your computer’s Host file: The Host file is responsible for communicating between iTunes and Apple servers. , Error 3014, Error 3194 and Error 3200 or Error There was a Problem downloading the software will occur, to check this problem, do the following:

If you are using a MacBook: First run the Finder section and from there the Applications option and then click on Utility, then run the Terminal section and type sudo nano / private / etc and then hosts and the key Press Return. Enter the password and click Return again, in this case the host file will be displayed, now go to the section indicated by the arrow key and make sure that the gs.apple.com command does not exist in this section. If this command appears in this section, add a # symbol and then a space at the beginning to make it gs.apple.com, then press the Control-O key to save the changes. Now hit Control-X to exit the editor and finally restart your MacBook.

But if you are using Windows computers, do the following:

First, press the Start key to bring up the computer menu, then select All Programs, then Accessories, then select Notepad و, and then click Run as administrator. Now select the Continue option and when the Notepad program is running, from the top menu, click on the File option and then Open. Enter / C: / Windows / System32 / Drivers / etc / and then hosts in the path to open the host files. Now make sure that the gs.apple.com command is not in the Notepad file, and if this command exists, add a # symbol and then a space at the beginning to change the phrase to # gs.apple.com, Then from the top menu of the Notepad app, click File, and then click Save to save the changes.

6- The most common iPhone errors in the field of jailbreak

Jailbreaking Apple iphone and iPads can also cause certain errors on iPhone and iPad, the main error that appears on iPhone and iPad related to jailbreak is error 1015.

Fix iPhone errors in jailbreak area

The following solutions can be used to fix this jailbreak error:

Using DFU Mode: Using DFU Mode can eliminate jailbreak-related errors such as error 1015. To do this, you need to connect the appropriate interface cable of your iPhone or iPad to the computer with MacBook and run the iTunes application, then press the power and home buttons of the iPhone at the same time and hold for 5 seconds after the device restarts. . Release the power button now; But keep pressing the Home button, doing so will leave the iPhone screen black; But the device is detected by iTunes, finally select the restore option and wait for the restore process to be done.

7. Other common errors on Apple iPhones and iPads

Some other iPhone errors such as 0xE8000001,0xE8000006b, 0x800000a, 0x80000065 may appear during device restoration, which are usually caused by a malfunction between the phone and the computer. 90% of these errors occur when you use a Windows computer to restore your iPhone or iPad through iTunes software.

Fixed other common errors on Apple iPhones and iPads

To fix the errors 0xE8000001, 0xE8000006b, 0x800000a, 0x80000065 Apple has provided solutions that we will mention below:

1- Update iTunes and Windows PC: In the first step, make sure that the latest update of iTunes and all new updates of Windows operating system are installed on your computer, updating the two mentioned above can solve the mentioned problems and errors.

2- Replace the USB port: The USB port that you use to connect the iPhone to the computer may not be suitable and has been disconnected and plugged in, so it is better to use another USB port for your computer. Connect with it between your iPhone and your computer.

3- Force Stop Three special executable files: Three executable files known as exe, AppleMobileDeviceServise.exe and iPodService.exe can also cause errors such as 0xE8000001, 0xE8000006b, 0x800000a and 0x8000065 to be deactivated. Select the Alt + Shift + Esc keys on your keyboard to bring up the Task Manager window, then right-click on the files and finally select the TasEnd Task option to deactivate these files.

4. Delete the ockLockdown folder: A folder called Lockdown can also cause 0xE8000001, 0xE8000006b, 0x800000a and 0x8000065 errors, so you must first disconnect your iPhone or iPad from the computer and exit the iTunes application. Then click on the Windows key or press the Esc + Ctrl key combination, then type% ProgramData% in the search field and press the کلیدEnter key. Now double-click the Apple folder to open it, then select the Lockdown folder and select Delete to issue the delete command, then select Yes to agree to delete this folder, finally PC and iPhone Restart yourself and restore the device again.

5 – Uninstall and reinstall iTunes software: Another method that can fix the problem and errors 0xE8000001, 0xE8000006b, 0x800000a and 0x8000065 is to uninstall and reinstall the iTunes application, so you can use the above methods Fix this.

8- The main errors specific to Apple iPads

Some of the errors are specific to Apple iPads, such as 1415, 1417, 1418, 1428, 1429 and 1430.

Fixed errors specific to Apple iPads

Apple has come up with solutions to fix the errors specific to Apple iPads, which we will mention below.

1- Update iTunes software: The first issue that should be considered is the iTunes software update, you should update the iTunes software to the latest available version, doing so will most likely fix these errors.

2- Replacing the cable and USB port: The inadequacy of the USB port of your computer or the cable through which you connected the iPad to the computer causes various errors, such as 1415, 1417, 1418, 1428, 1429 and 1430. To correct these errors, replace the USB cable and communication cable used.

3- Separating other peripherals connected to USB PC: Sometimes connecting other peripherals to USB ports of computers such as keyboard, mouse, etc. و disrupts the function of iTunes and iPod restorer, so it is better to have all ports at once. Release the USB of your computer or laptop and use only the iPod interface cable to connect it to the computer, this will most likely fix the errors.

4. Disable antivirus and firewall: First make sure that antivirus and firewall are disabled during ipod restore, restricting access through antivirus and firewall is one of the main reasons for the appearance of errors such as error 1415, error 1417, error 1418, 1428 error, 1429 error and 1430 error are on Apple iPads, so it is better to follow the above.

 

 

See Also IPhone 13 comes without port and with Internet Recovery support

follow on facebook
follow on linkedin
follow on Reddit