Description
MATLAB/SIMULINK Bible|Go From Zero to Hero! It is a training course from the Udemy website that helps you get familiar with Simulink by building 10 practical projects. Simulink is a graphical programming environment and simulation tool based on MATLAB software, which is used for modeling, simulation, and analysis of dynamic systems. This course is designed as a project-based course and teaches you practical and theoretical content in the form of working with 10 practical projects.
During this training course, you will become familiar with Simulink and learn how to create Simulink models and run simulations on physical systems. This course does not require special prerequisites and is suitable for users who have never used MATLAB and Simulink software. Using Simulink, you can analyze the behavior of a system without creating it and save money and time.
Items taught in this course:
- Development of Simulink models
- Construction, simulation, and analysis of mechanical and electrical systems
- Understanding the basic concepts of control systems
- Development of dedicated controllers in Simulink
- Design of PID controllers
- Increase your skills in working with MATLAB/Simulink
MATLAB/SIMULINK Bible | Go From Zero to Hero! :
- English language
- Duration: 4 hours and 34 minutes
- Number of courses: 41
- Education level: Intermediate
- Lecturer: Dr. Ryan Ahmed, Ph.D., MBA, Mitchell Bouchard, Stemplicity School Online
- File format: mp4
Course headings
41 lectures 04:34:51
Course Introduction and Welcome Message
1 lecture 01:11
PROJECT #1: GENERATE, DISPLAY AND EXPORT SOURCE GENERATING SINE WAVE
3 lectures 21:52
PROJECT #2: BUILD A MATHEMATICAL EQUATION (DIFFERENTIATION/INTEGRATION) SYSTEM
4 lectures 24:08
PROJECT #3: SIMULATE A MASS SPRING DAMPER SYSTEM IN TIME DOMAIN
4 lectures 27:02
PROJECT #4: SIMULATE A MASS SPRING DAMPER SYSTEM IN S-DOMAIN USING SIMULINK
4 lectures 24:26
PROJECT #5: BUILD AND SIMULATE A BATTERY MODEL
5 lectures 52:11
PROJECT #6: BUILD PROPORTIONAL INTEGRAL DERIVATIVE (PID) CONTROLLER IN SIMULINK
5 lectures 31:45
PROJECT #7: APPLY A PID CONTROLLER TO MASS SPRING DAMPER SYSTEM
2 lectures 11:28
PROJECT #8: TUNE A PROPORTIONAL INTEGRAL DERIVATIVE (PID) CONTROLLER
3 lectures 22:30
PROJECT #9: DEVELOP AND SIMULATE ADAPTIVE CRUISE CONTROL SYSTEM
5 lectures 25:18
PROJECT #10: DC MOTOR POSITION CONTROL IN SIMULINK
5 lectures 33:00
Course prerequisites
- There is no prior experience required, even if you have never used MATLAB or Simulink before.
- Matlab and Simulink software. Downloadable from MathWorks website.
Pictures
Sample video
Installation guide
After extracting, watch with your favorite player.
Subtitle: None
Quality: 720p
download link
Password file(s): www.downloadly.ir
Size
4.68 GB