Download Advanced Hardware and PCB Design Masterclass 2022 – EsteemPCB

Advanced Hardware and PCB Design Masterclass 2022 -EsteemPCB


Advanced Hardware and PCB Design Masterclass 2022 – EsteemPCB is the name of the advanced video training course on hardware and printed circuit board design with Altium software, published by Udemy Academy. In this course, you will design the RK3399 printed circuit board by choosing the right parts and schematic design for SDRAM, Power, EMMC, WIFI/BT, LDO/DC-DC/Buck-Boost parts. After completing the course, you will be able to design any processor-based board from zero to a hundred without the need for simulation.

What you will learn in EsteemPCB – Advanced Hardware and PCB Design Masterclass 2022:

  • How to extract information from the Requirement Sheet for the processor, SDRAM, EMMC, WIFI/BT modules and…
  • How to choose a processor by determining the number of cores, cache, bandwidth, clock required.
  • Different processor architecture
  • Types of internal and external SDRAMs (DDRX, LPDDRX and their improved versions).
  • Comparison of external SDRAMs up to DDR5 and LPDDR5
  • Different types of SDRAM signals (data, address and command, control groups and clock)
  • Create a process to select SDRAM, PMIC, EMMC, WIFI module, processor
  • How to read the data sheet of the various components used in this RK3399 board, 2GB LPDDR4 SDRAM, 16GB EMMC, PMIC, WIFI/BT Module and…
  • Pinmap SDRAM, EMMC, SDIO, MIPI, EDP, Type-C, USB3.0 and 2.0, SDMMC and…
  • How to design processor schematics, SDRAM, EMMC, WIFI, PMIC using relevant datasheets and design instruction documents.
  • Discuss the different certification and regulation of WIFI/BT module according to USA, Europe, Canada etc.
  • Impedance setting for more than 1000 connections in one excel sheet.
  • Board layering (4/6/8/12 layers)
  • Layout planning, initial layout, high-speed design rules and length matching, power page design based on sections, layout optimization, etc.

Course details

Publisher: Yudmi
teacher: Aviral Mishra
English language
Training level: advanced
Number of courses: 61
Training duration: 21 hours and 40 minutes

Course headings

Course prerequisites

Students should have an understanding of board design.

Students should have completed the Complex Mixed Signal Board Design Course.

Students should have Patience and Determination to complete the course which has more than 10,000 interconnects and Lot of Dense Components to route.

For this course, students should have “Altium Designer” installed on their PC / Laptop

You do not need any prior knowledge of “Altium Designer” because we’re going to do everything from scratch.

Course images

Advanced Hardware and PCB Design Masterclass 2022 - EsteemPCB

Video introducing Advanced Hardware and PCB Design Masterclass 2022 – EsteemPCB

Installation guide

After Extract, view with your favorite Player.

Subtitle: None

Quality: 720p

download link

Download part 1 – 4 GB

Download part 2 – 4 GB

Download part 3-4 GB

Download part 4 – 4 GB

Download part 5 – 4 GB

Download part 6 – 1.71 GB

Password file(s):


21.7 GB

4.7/5 – (2304 points)

Be the first to comment

Leave a Reply

Your email address will not be published.