Download Bentley OpenFlows WaterCAD CONNECT Edition 10.04.00.108

Description

WaterCAD product Bentley It is a software that various water and electricity and engineering companies in all parts of the world have full confidence in its capabilities as a comprehensive tool to make decisions for their water infrastructure. By using WaterCad, it is possible to design and analyze new water systems as well as manage existing water supply networks effectively, using WaterCad will reduce energy consumption and also reduce the risks of water distribution. This program helps you to correctly design, plan and manage the map of water distribution systems and networks. All these will increase the service capacity, provide quality design with the lowest costs, and finally, the possibility of easy replacement and transfer of the water system at any time.

Features and features of WaterCAD software:

Analysis of piping system and critical points
The possibility of optimizing the system to protect against heat flows
The possibility of building and managing hydraulic models
Complete design of water distribution network
The possibility of planning for the development of flushing operations
The ability to detect water leaks
Energy Management
And…

required system

Installation Requirements
Installation requirements include:
A CD drive or access to the Internet required for product installation. The minimum system configuration for installation:

Operating System:

– Windows 7 SP1
– Windows 8, 8.1
– Windows Vista SP2
Note: WaterCAD may run on other Windows operating systems than those listed above. However, the program was not tested on those.

Software Prerequisites:

– Microsoft .NET Framework version 3.5 (Installer will attempt to download and install this prerequisite if it is not present during installation) Note: The 64 bit version of this Bentley software requires the “64-bit Access Database Engine” (not included with this Bentley software) to be able to support newer MSOffice file formats which can be used in ModelBuilder and SCADAConnect. If you do not have a compatible version of the Access Database Engine installed and wish to connect to these data sources, either download and install the 64-bit Access Database Engine from Microsoft using the following link: http://www.microsoft.com / enus/download/details.aspx?id=13255 or alternatively, use the 32 bit version of the software, which can be accessed from
C:Program Files(x86)BentleyWaterGEMSWaterGEMS.exe, which supports these formats without requiring additional components.

Platform Requirements:

– Bentley WaterCAD V8i SELECTseries 5 does not require any additional CAD or GIS software to work as a stand alone application. However WaterCAD V8i can run on the following platform (if available):
– MicroStation V8i (8.11.9.459)
– AutoCAD 2014
– AutoCAD 2015
– ArcGIS 10.2, 10.2.1
Note: WaterCAD may run on earlier or later versions than those listed above.
• ProjectWise Support:
– WaterCAD V8i is compatible with ProjectWise V8 XM Edition or later and has been fully certified using ProjectWise 08.11.11.111 but should work with other versions of ProjectWise.
• SELECT server:
– WaterCAD V8i SELECTseries 5 requires SELECTserver XM Edition or later and will not run with SELECTserver 2004 Edition.Minimum Profile
The minimum recommended workstation profile for running WaterCAD V8i (eg, for simple systems) is:
• Processor: As per minimum operating system requirements.
• RAM: As per minimum operating system requirements.
• Hard Disk: The software itself requires at least 1 Gigabyte (GB) of disk space, as well as additional space for user models and data files.
• Display: As per minimum operating system requirements.
When running WaterCAD V8i in the AutoCAD or ArcGIS platforms, the minimum requirements are superseded by the minimum requirements listed for those platforms.